PLACE CARD CHAIRS
Just found these and thought I would share..
Member since
PLACE CARD CHAIRS
Member since
Re: PLACE CARD CHAIRS
very cute
Member since
Re: PLACE CARD CHAIRS
THOSE ARE ADORABLE WHERE DID U FIND THEM?
Member since
Re: PLACE CARD CHAIRS
They really are too cute. Where DID you find them???
Member since
Re: PLACE CARD CHAIRS
there is a thread somewhere on how to make them![]()
Courtesy of nbird:
Found the instructions!!! No pic or link though
'Making Seating Cards'
if calligraphing the names and numbers, do so after the chairs are formed. If printing, do so before cutting the paper.
The name goes on the panel for the back, and the table number on the panel for the seat.
1. To form each paper chair, you will need one 11-by-2 1/4 inch strip of card stock; you can fit three on an 8 1/2 by 11 inch sheet. Use a bone folder to score each strip into four sections: a top one that's 4 1/4 inches long, then 3 equal 2 1/8 inch sections.
2. fold the strip at the top score line; the short section of the L will be the chair's back.
3. Bring the horizontal part of the strip down as shown, and fold at the next score line, formng the chair back and starting the seat.
4. Fold the strip down at the front of the seat to make the front legs Use a glue stick or double-sided tape to secure the two layers of the chair back together. Set right side up and trim, if necessary!
Courtesy of nbird:
Found the instructions!!! No pic or link though
'Making Seating Cards'
if calligraphing the names and numbers, do so after the chairs are formed. If printing, do so before cutting the paper.
The name goes on the panel for the back, and the table number on the panel for the seat.
1. To form each paper chair, you will need one 11-by-2 1/4 inch strip of card stock; you can fit three on an 8 1/2 by 11 inch sheet. Use a bone folder to score each strip into four sections: a top one that's 4 1/4 inches long, then 3 equal 2 1/8 inch sections.
2. fold the strip at the top score line; the short section of the L will be the chair's back.
3. Bring the horizontal part of the strip down as shown, and fold at the next score line, formng the chair back and starting the seat.
4. Fold the strip down at the front of the seat to make the front legs Use a glue stick or double-sided tape to secure the two layers of the chair back together. Set right side up and trim, if necessary!
Member since
Re: PLACE CARD CHAIRS
hey - i had something sorta similiar, take a look (we had a sign placed on the table saying 'take your seat' ![]()
)
Member since
Re: PLACE CARD CHAIRS
Posted by MrsTC
hey - i had something sorta similiar, take a look (we had a sign placed on the table saying 'take your seat')
OOOHHH! Those are cute too!
Member since
Re: PLACE CARD CHAIRS
HI Girls,
I was bored at work and was going through my wedding folder (all the things I saved up until this point). Unfortunately, I don't know what site I saved them from..
Sorry!![]()
I was bored at work and was going through my wedding folder (all the things I saved up until this point). Unfortunately, I don't know what site I saved them from..
Sorry!
Member since
Re: PLACE CARD CHAIRS
It's a Martha Stewart idea! I saw it in a magazine a while ago... The directions listed above are exactly what's in her magazine.
Here's the other page- with another picture of what to do.
Here's the other page- with another picture of what to do.
Member since
Re: PLACE CARD CHAIRS
I was just emailed other VERY detailed instructions on how to make these. FM if you want the file and details.
Member since
Re: PLACE CARD CHAIRS
I just tried to make these, and they weren't hard at all. Just need good cardstock.
