Those of you who did the pocketfolds, what kind of adhesive did you use to mount the actual invite onto the pocket fold?
Thank youuuu !!!
yelley77
Posted:
Member since
Re: DIY Pocketfold ???
that is the last thing I need to get. Michaels had quite a few adhesives for this type of thing, I suggest going there... that is where I plan to get mine!
Wifeynella
Posted:
Member since
Re: DIY Pocketfold ???
double stick tape
kslmbuggie
Posted:
Member since
Re: DIY Pocketfold ???
i used the double sided tape strips. ac moore has them for $19.99 for 4 in a pack. With the coupon it is $12 for 4. This is the best value I have seen so far. They come in dispensers which look exactly like the white out tape dispensers.
Espo22
Posted:
Member since
Re: DIY Pocketfold ???
double sided tape but make sure you get the permanent double sided tape. The removeable one wont work at all
nifheim
Posted:
Member since
Re: DIY Pocketfold ???
if you have a coated stock as your pocketfold it only works with glue dots. Rubber cement is fine but may shift (takes a while to dry) double stick tape didn't work with the coatings.
melonhead
Posted:
Member since
Re: DIY Pocketfold ???
scotch restickable glue stick
available at staples. i use this stuff often. it's great. stays stuck really well unless you want to remove it. i highly recommend using this stuff. also, it's cheap, maybe 2.50 for a tube. way less than 2 tubes did my 110 invites. good luck
